LUNA 110 AL
Description
- Analogue twilight switch
- External light sensor included in delivery
- Adjustable On and Off switching delay
- to avoid faulty operation caused by lightning, car headlights etc.
- Display of channel and switching status
- DuoFix spring terminals
- for 2 conductors per connection terminal
- Extended brightness levels and adjustable delay
- Five adjustable brightness levels for simple setting of lux value
- Zero-cross switching for relay-saving switching and high lamp loads (not with 24 V devices)
- Permanent OFF and permanent ON function can be set on the potentiometer
- Test function
- for monitoring installation independent of set brightness value
- Infinitely adjustable switching brightness
Technical data
| Operating voltage | 220聽鈥撀240 V AC |
| Frequency | 50聽鈥撀60 Hz |
| Number of channels | 1 |
| Stand-by consumption | ~1,3 W |
| Capacity loss max. | 1,4 W |
| Setting range brightness | 2聽鈥撀50000 lx |
| Switch-on delay | 0聽鈥撀20 min |
| Switch-off delay | 0聽鈥撀20 min |
| Type of contact | Changeover contact |
| Switching output | Potential-free, not for SELV |
| Width | 2 modules |
| Installation type | DIN rail |
| Type of connection | DuoFix spring terminals |
| Keyboards | 3 potentiometers |
| Switching capacity |
16 A (at 250 V AC, cos 蠁 = 1), 16 AX (Fluorescent lamp load) |
| Switching capacity min. | <10 mA |
| Incandescent lamp load | 3600 W |
| Halogen lamp load | 3600 W |
| Fluorescent lamp load (conventional) not corrected | 3600 VA |
| Fluorescent lamp load (conventional) series-corrected | 3600 VA |
| Fluorescent lamp load (conventional) lead-lag circuit | 3600 VA |
| Fluorescent lamp load (conventional) parallel-corrected | 1200 VA 130 碌F |
| LED lamp | < 2 W = 50 W or 2-8 W = 160 W |
| Energy saving lamps | 34 x 7 W, 27 x 11 W, 24 x 15 W, 22 x 23 W |
| Fluorescent lamp load (electronic ballast) | 1000 W |
| Test approval | VDE |
| Housing and insulation material | High-temperature resistant, self-extinguishing thermoplastic |
| Ambient temperature | -30 掳C聽鈥β+55 掳C |
| Type of protection | IP 20, sensor IP 55 |
| Protection class | II, Sensor III |
| Max. cable length to sensor | 100 m |




